MDT962B-4A compatible LCD display 9 inch for E64 M64 M300 CNC system CRT monitor

MDT962B-4Acompatible LCD display 9 inch for E64 M64 M300 CNC system CRT monitor

MDT962B-4ACRT monitors, for 9-inch single amber CRT monitors, Mitsubishi CNC systemcommonly used in the M3 M310 E60 M64 M64S C64 used in the system.



MitsubishiMDT962B-4A, Mitsubishi M64 E60 CNC machine tools display system parameters:

1,CRT (cathode ray tube) size 9-inch, 90-degree view angle, Neck Diameter 20mm,color: amber-proof standard: T-Band Standard

2,the signal input: analog video signal (n) 0 - 2.3V, the horizontal line stepwaysync, TTL digital signal (positive polarity), field-step approach verticalsync, TTL digital signal (positive polarity)

3,scanning frequency: Line Frequency H = 24Khz, field frequency V == 50.5Hz

4,the video display size: horizontal 160mm +/- 3mm, vertical 110mm +/- 3mm

5.Power: AC100-230V (50 / 60Hz)

6,the signal input: VIA Standard 10 PIN EDGE connector



OriginalMDT962B-4A CRT monitors as follows:

TheTOTOKU MDT962B-4A 9 inch amber CRT is used in the MITSUBISHI E60 M64 M64S C64system. The signal interface is a 10 pin printed board type signal connector.The power line is 4 lines and AC100V



The replacement LCD display as follows:

Howto install it: